Eemax "Thermostatic" Electric Tankless EX55T
SKU
EX55T
Eemax "Thermostatic" Electric Tankless EX55T
Fully Adjustable Temperature Range between 100-140°.
Special settings of higher or lower range available upon
request. (see spec options)
Eliminate Costly Mixing Valves.
On Demand Hot Water - no delay.
Continuous Hot Water - no storage capacity to run out.
Reduces Installation Cost and Material - no T & P relief
valve needed (check local codes).
Easy Installation - only one cold or hot water line need be
brought to installation - integral compression fittings for ¹⁄₂”
pipe (5/8” OD) on bottom (no sweat connections).
Cut Energy Waste - flow switch activates heater only on
demand (no standby heat loss) - 99% efficient.
Sophisticated microprocessing temperature control (+/- 1°F).
Prevents Legionella Bacteria Growth.
Meets ANSI Z358.1 Tepid Water Requirements
Anti-scald Protection. Reduce wide temperature fluctuation.
Reduces Calcification, Liming and Sedimentation.
Complies with Handicap Requirements.
EX = Bottom Water Connection, 1/2" compression fittings
Volts 240V (can be used at 208V with 25% reduced output and amperage)
KW 5.5kW
Amps 23A
Rise at .5 GPM 75°F
Rise at .75 GPM 50°F
Rise at 1.0 GPM 38°F
Rise at 1.5 GPM 25°F
Wire Size AWG - 10
Dimensions - 10.75" x 5.25" x 2.125"
Compact Size - dimensions 10.75”x5.25”x2.87”
weight 3 lbs.
Field Serviceable Element - replaceable cartridge element
(1 year warranty).
Warranty - Full Factory Warranty - Heaters are guaranteed
against failure due to leaks of “Heater Body/Element
Assembly” for a period of FIVE YEARS.
High Temperature Limit Switch
|