Stiebel Eltron DHC 10-2 Instant Tankless Electric Water Heater

Up to 50% less power consumption compared to storage type heaters
Hot water instantly
Exclusive built in scald guard thermostat
Lower installation costs compared to tank type units
DHC 10-2 Specifications
Phase: 1
Voltage: 240 V
Wattage: 9.6 kW
Amperage: 40 A
Min. required circuit breaker size: 50 A
Recommended Wire Size: 8 AWG Copper
Min. Water Flow to Activate Unit: 0.79 GPM
Weight: 5.3 lbs
Dimensions: 14-3/16" H X 7-7/8" W X 4-1/8" D
Nominal Water Volume: 0.13 Gal
Working Pressure: 150 PSI
Tested to pressure: 300 PSI
Water Connections: 1/2" NPT
The Stiebel Eltron DHC tankless water heaters are designed for installation at the point of use. They heat water instantaneously as it flows through the unit. Stand-by losses are completely eliminated.
The heating elements are controlled by a flow switch and by an exclusive scald-guard thermostat, which keeps the water temperature within safe limits at all times. In addition, the DHC water heaters are equipped with a safety high-limit with manual reset. The rugged all copper design ensures many years of reliable service.

The Stiebel Eltron DHC tankless water heaters are ideal for restrooms or kitchenettes in an office or commercial / industrial setting:
Office Buildings
Gas Stations
Stores
Schools
Malls
Hotels / Motels
Warehouses
Commercial Condominiums
Restaurants
Manufacturing Facilities

In a residential setting, they are suited for the following applications:
Bathroom Sinks
Kitchen Sinks
Laundry Areas
Small Cabins
Boats / RVs